Different Effective Methods Involving Commercial Carpet Cleaning

When it comes to choosing a carpet cleaning company its likely that you will be spoilt for choice. There are different ways of cleaning a carpet and yet its most crucial to understand each and every cleaning method before you can choose something that looks promising. In the following lines we are about to discuss the different types of carpet cleaning methods and how carpet cleaners in Brisbane apply them. Have a look:

Hot water extraction

Steam carpet cleaning is also known as hot water extraction, involving application of hot water in high pressure to clean the carpet fibers and dissolving the dirt in carpets. Hot water extraction is a typical cleaning process where a cleaning agent is applied on the soiled fibers while stirring them with brush, following a rinsing process.

After the cleaning agent settles on the carpet fibers, it is left to settle for a short while. Its only after the cleaning agent is applied and allowed to settle in, the cleaning professional will wash the carpet with an equipment and rinse off the cleaner thoroughly following which they will leave the carpet for drying.

On an average a carpet measures up to 3000 sq ft, which again would take around a couple of hours for cleaning. Additionally, this carpet will take around 4 hours for drying. A majority of companies advise owners to get their carpets cleaned during late afternoon so that the soft furnishing will get enough time to dry up and can be used from the next morning.

Carpet shampooing

Carpet shampooing is a popular technique which was highly popular till the time encapsulation technology arrived. Carpet shampooing is effective especially for heavily soiled carpets. The only disadvantage of this technology is it takes a lot of time to dry a carpet owing to the residues of wet foam left behind after a wash. Additionally, carpet shampooing makes the fibers stickier following a dry up session.

Encapsulation

Foam encapsulation! Have you heard of this technique yet? Foam encapsulation entails the use of synthetic detergents which forms the base. These synthetic detergents will then crystalise and form a powdered substance after drying. Encapsulation process is highly scientific. It helps loosen dirt particles and encapsulate them into powdered form with drying of the cleaning foam. It’s been found that foam encapsulation is more popular than carpet shampooing as the encapsulation method is resource efficient. It makes less use of water resulting in shorter drying period and is considered a choiceable approach by commercial cleaners in Brisbane.

Bonnet cleaning

It’s been found over and again that bonnet cleaning is effectual in cleaning surfaces of carpets as it involves an approach where the upper layers, mainly the one comprising the fibres, are treated. Bonnet cleaning uses a motorized machine that has a spinning pad which stays immersed in cleaning solution for absorbing dirt from the surface of the carpet. Bonnet cleaning is considered a quick solution for cleaning carpets that are laid out in heavy-traffic areas where these floor coverings get soiled. Also, it’s been found that its appropriate for carpets which demand moisture-less cleaning so that they can quickly dry up.

Dry carpet cleaning

Dry carpet cleaning entails compound cleaning and is the latest cleaning practice which has gained popularity in modern times. It is extremely effective and convenient. Dry carpet cleaning makes use of different types of compounds and powders which brings better results. The process is extremely trusted. During the process the professional will apply the cleaning agent with the help of a motor driven rotating brush machine that opens up the fibers, allowing the compounds to settle down, finally leading to thorough cleaning.

These are different types of carpet cleaning practices which are widely in use.

Author-bio: the author runs a Carpet Cleaners company in Brisbane. In recent times the author has been shedding light on key aspects concerning the subject.